4.
Service
Have your Battery Crimping Tool serviced by a qualified service technician using
only identical replacement parts. This will ensure that the safety of the Battery
Crimping Tool Kit is maintained.
SPECIFIC SAFETY RULES
1.
Maintain labels and nameplates on the tool which carry important safety information.
If unreadable or missing, contact the agent to replace.
2.
This product is not a toy, keep it out of reach of children.
3.
Do not put your fingers into the head of the tool during operating. Your fingers could
be pinched very severely.
4.
Make sure the head was locked firmly during operation.
5.
Do not use the tool without dies
6.
Do not crimp on live cables or conductors
7.
Do only crimp copper or aluminum conducting material
8.
Do not knock any parts of the tool, otherwise it will cause injury.
9.
Do not operate at will, it will damage the MCU and electric system
10. The design of the limit screw on the head is for preventing the head from dropping or
popping.
11. Make sure the head was locked firmly during operation.
12. Do not use this tool for continuous use. After 30 to 40 cycles, allow the tool to cool for
15 minutes.
13. Do not secure this tool in a vise. This tool is designed for hand-held operation.
14. The built-in safety valve goes through strict pressure test before marketing; please do
not adjust the pressure by unprofessional person. If the pressure is not enough please
return the tools back to the service center. The tool only can be reused after checking
and testing by trained person.
15. The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
