Ecler WiSpeak TUBE, User Manual

Page: 26 / 79

26
(audio player) to the transmitter over long distances, which would be necessary in
some ca
ses, where it’s not possible to have booth devices close to each other.
For each channel (left or right) of the balanced input, INPUT1, the wiring is as follows):
Hot or direct signal > + terminal
Cold or inverted signal > – terminal
Ground > ⊥ terminal
The AUX OUT connection is available to connect external audio systems, like subwoofer
reinforcement loudspeakers, mixers, amplifiers, matrices, etc. By default, this output will
deliver exactly the same audio signal as the one sent to the receive
rs’ network, but this
can be modified using the WiSpeak grip app.
When all the connections are made, it’s time to power up the transmitter using the
included external power supply, connected to the DC IN terminal at the rear panel, and
start the WiSpeak setup process.
7.4.1 Multiple COREs installation
For large spaces you’ll be able to install 2 or more CORE’s transmitter units. In this case
we recommend:
•
Keep a minimum distance of 15 ~ 20m between COREs
• With all devices installed, switched off and unpaired, switch on CORE 1
• Switch on the closest CORE 1 receivers and execute discover and link (with CORE
2 and the rest of receivers OFF)
• Once the first WiSpeak system is paired correctly, switch on CORE 2
• Switch on the rest of receivers and execute discover and link.
WARNING
: Multiple CORE in the same room could reduce system performance. Best
performance is reached by separating CORES as far as possible, location of transmitters
is very important to avoid RF interferences.