Ecler WiSpeak TUBE, User Manual

Page: 63 / 79

63
The page shows the following sections, in the case a of a CORE transmitter model:
21.1. Inputs
1. IN1 Gain, IN2 Gain : sliding control that allows to adjust the preamplifier gain for
the two available analogue audio inputs in a CORE Master device, IN1 (stereo,
balanced, Euroblock connectors) and IN2 (stereo, unbalanced, RCA connectors)
Note:
the third available input is the Bluetooth one, which has no preamplifier, thus
no gain adjustment
2. Input Select : switch control to select the current audio input to be played back in
the WiSpeak system
Note:
a blinking Bluetooth icon means that the Master device is not currently
paired with any device (smartphone, tablet, BT transmitter) to get Bluetooth audio
from it. It stops blinking when a device is paired for audio via Bluetooth with the
Master device
3. Input Select User Enable : ON/OFF buttons to decide which input select options
will be delivered to the end user (with WiSpeak grip app logged in User profile, not
Admin profile). These options can be selected from the CORE front panel controls,
as well as from WiSpeak grip app when logged as
User . In the above example, IN1
and Bluetooth inputs are enabled for its selection, but IN2 is disabled.
Note:
3, 2 or just 1 of the three inputs can be enabled, in this last case meaning
that the input selection is fixed and the end user can’t modify it