Ecler WiSpeak TUBE, User Manual

Page: 70 / 79

70
Controls and parameters available:
• Alias field: shows the Alias (name or label) for each unit, by default matching its
model name, followed by -XX where XX matches the last 2 digits of its MAC
address. Clicking on it allows to edit it using the OS keyboard:
•
• WiSpeak RX channel : a selector to decide which of the two available WiSpeak
channels will be played back by the receiver unit.
Reminder: the selected audio source in the transmitter unit is converted from ST
to MONO and is sent to the receivers’ network, always using two WiSpeak
wireless channels : CH1 and CH2. Each receiver can select CH1 or CH2 and play
it back
Example: some receivers can be playing CH1 (full band audio) and some others
CH2 (Low-pass filtered) as they might be connected to subwoofer units by means
of their AUX OUT terminal
• Volume : individual playback level for each receiver unit, 0 to 100 values. This
control allows deciding which sound spots or areas in the installation will have
higher / lower sound volume than others. The Master or General volume control
gestured by the WisPeak grip end user (or the Admin user while logged), or by
means of the CORE’s front panel knob or the wall panel connected to CORE’s
REMOTE port, will affect the full set of receivers in a proportional way, respecting
the individual volume set up in this page for each receiver.