Ecler WiSpeak TUBE, User Manual

Page: 52 / 79

52
17. WiSpeak grip INTRODUCTION
WiSpeak grip is an Android/iOS app for the setup and control of a WiSpeak Wireless
Audio System. It is compatible with Android 5.0 or higher / iOS11 or higher.
A WiSpeak system is made up of one transmitter device (CORE model) and from 1 up to
a maximum of 24 receiver units (TUBE or CUBE models), where:
• the transmitter device is the electronic unit that communicates with all the
receiver devices to create a WiSpeak wireless network, and takes the role of the
Master unit in it
• the receiver units are self-powered loudspeakers with wireless audio reception
and control capabilities, under the control of the Master unit
The Master unit has these main functions:
• to pair (link) and keep a stable communication with all the receiver units in the
system
– when paired and within the valid wireless range - supervising the
connection quality of them all
• to take care of the global configuration of the system (audio inputs in use,
equalisation, levels, etc.)
• to send the individual configuration commands to each receiver unit, as each
receiver can have customised parameters
• to send audio contents to all the receiver units, keeping a perfect synchronisation
among them
For a basic WiSpeak system setup and end user management (“plug & play”), which
means pairing the receiver units with the Master, sending audio to them and adjusting
the Master (general) audio volume, it is not mandatory to use WiSpeak grip, as it can be
easily and quickly done by means of the transmitter (Master) unit front panel controls.
However, WiSpeak grip provides the installer of the system with many fine-tune options
that can lead to a system’s more precise performance, better yet customised to each
venue and end user profile requirements.
The app can be downloaded from the Internet stores: