Ecler WiSpeak TUBE, User Manual

Page: 45 / 79

45
16.2. TUBE
WiS (RF WIRELESS DIGITAL AUDIO)
Frequency band U-NII 5.1 – 5.8GHz (supported worldwide)
Up to 24 non-overlapping RF channels
2
DFS support
Coverage range Up to 12m from a TX to any paired RX, direct line
of sight
1
Audio channels
Audio transmission
WiSpeak CH1 / CH2
24bit uncompressed, 48kHz SR
Digital Audio Sample size 24 bits
Digital Audio Sampling rate 48kHz
Digital Audio Frequency Response 20Hz – 20kHz (-0.1dB)
Digital Audio converters DAC Resolution: 24 bit
DAC Dynamic range: 100dB
Latency From TX IN to RX AUX OUT <6ms
From TX IN to RX Speaker <6ms
Jitter among receivers ±1us
Pairing time Up to 120s
3
Reconnection time Up to 120s
3
SYSTEM
Effective Freq. Range 105 - 20kHz (-10dB)
Coverage angle
Sensitivity
180x180 (HxV)
83 dB (1W/1m)
Maximum SPL 96 dB continuous / 102 dB peak
TRANSDUCERS
Ways 1-way
Driver 3” driver
Nominal impedance 4Ω
POWERED
Power 18 W RMS / 72 W Peak
Audio inputs CH1 / CH2: Digital, Mono, RF Wireless Audio
Audio outputs Internal Loudspeaker: Analog, Mono, Self powered
AUX OUT: Analog, Mono, Balanced, Euroblock
THD + Noise <0.15% @1kHz Full power
Signal Noise Ratio >95dB at RX AUX OUT
Input sensitivity 0dBV / 10kΩ