Ecler PLAYER ONE User Manual Download Page 70

Page: 70 / 155

13.5.2

Store and Forward (rsync)

The Store & Forward module allows you to sync the content of the USB/uSD device with a folder that is
hosted on a remote server on a daily basis. It also allows for automatic playback of this content, in
combination with the

Load

preset1

reboot mode. This service uses the

rsync (Remote Sync)

sync tool.

Figure 60: Store & Forward module

General

: enables the S&F service and selects the sync time.

Remote source

: remote server configuration.

Local target

: configuration of the local folder where the content is stored.

Log

: activity log for the S&F module

For more information on the Store & Forward service, please

refer to Annex1 Configuration of an SSH

server for Store & Forward.

Summary of Contents for PLAYER ONE




























































































































































Search results

Summary of Contents for PLAYER ONE

Reviews:

Related manuals for PLAYER ONE

Brands by name

Popular brands

Ecler PLAYER ONE, User Manual

Search results

Summary of Contents for PLAYER ONE

Reviews:

Related manuals for PLAYER ONE

Brands by name

Popular brands