Ecler PLAYER ONE, User Manual

Page: 131 / 155

131
How to load source “AIRPLAY”?
*note the { } around the parameter which indicates optional arguments
33.3 CONFIG (CFG) FUNCTIONS
Set and get ePLAYER1 parameters: PRESET, CMS, SAF, CAL, EVENT, GDRIVE, SCRIPT and LOG. Please
refer to the corresponding section to check how to set/get each parameter.
Functions
Function:
Description:
Restore ePLAYER1 configuration to its initial state (factory defaults). Please note that using this function
you will lost all your changes.
Function:
Description:
Restore ePLAYER1 settings from the urlRestore file e.g. mmc://good-settings.config
http:://my.server/ePLAYER1/mycompany.settings
Arguments:
urlRestore
– String indicating the url where settings you want to restore
Note:
If you wan to apply all settings you must call DEV_reboot or call every XXX_reload function to apply
changes one per one.
Function:
Description:
Backups ePLAYER1 settings to urlBackup.
Arguments:
urlBackup
– String indicating the url where settings are stored e.g. mmc://good-settings.config
http:://my.server/ePLAYER1/mycompany.settings
bUser
– Boolean set to true for user settings only, otherwise all the settings are backuped to the target
destination
Function:
Description:
Backups ePLAYER1 settings to urlBackup.
require "ePLAYER1"
ep = ePLAYER1.new()
ep.PLAYER_open({source=4})
CFG_reset()
CFG_restore(urlRestore)
CFG_backup(urlBackup, bUser)
CFG_backup2(urlBackup, type)