Ecler PLAYER ONE, User Manual

Page: 11 / 155

11
5.2 AC connection and powering on
The PLAYER ONE is powered by alternating current (AC) through its external power supply: 100-240
VAC, 50-60 Hz. This external power supply has several interchangeable connectors: American,
European, British and Chinese.
The operating environment should be dry and be totally free of dust. Do not expose the unit to dripping
or splashing. Do not place incandescent objects like candles on top of it.
If the unit requires any intervention and/or connection/disconnection, it must be powered off first. There
are no user-serviceable parts within the unit. To avoid buzzing, do not allow the power cable to intertwine
with audio shielded cables.
5.3 Audio output connections
The PLAYER ONE has 1 unbalanced stereo output on its rear panel.
The signal output connectors are 2 x RCA and 1 x stereo mini-jack.
5.4 Ethernet port for configuration and Internet connection
An RJ45 connector allows the unit to be connected to an Ethernet network or even directly (point-to-
point) to a computer.
This connection provides access to Internet contents, and to the configuration of the unit using a web
browser on the computer, which points to the IP address of the PLAYER ONE, showing the web
application embedded in the unit. Refer to the
PLAYER ONE & PLAYER ZERO web GUI application
manual for more information.
5.5 Wi-Fi interface for configuration and Internet connection
A Wi-Fi interface allows the unit to be connected to a Wi-Fi network or even directly (point-to-point) to
a computer by Wi-Fi.
This connection provides access to Internet contents, and to the configuration of the unit using a web
browser on the computer, which points to the IP address of the PLAYER ONE, showing the web
application embedded in the unit. Refer to the
PLAYER ONE & PLAYER ZERO web GUI application
manual for more information.