Ecler PLAYER ONE, User Manual

Page: 38 / 155

38
o
Source path/url: this stores a network or local address in the preset. This address must
be a valid address for the correct playback of audio content on the device. We recommend
reading the document "
how to identify audio stream URLs on the Internet ". You can refer
to the application prompts for entering local addresses (USB, SD, AirPlay, etc.). You can
click on "Source path/url" (blue) to open the address that is entered in this field in a new
browser tab. This option is available on several pages within the application. It is useful
for checking that an audio source (Internet radio, for example) is functioning correctly, or
for copying the address to create playlists (.m3u file, for example). See technical
information (datasheet) for audio and playlist formats that are supported by the player.
Please Note
: Internet radios saved via the front panel of PLAYER ONE are stored in the
Playlist field.
5. Play status: if this option is enabled, the status of the player will be overwritten when loading
the preset.
6. Volume (%) /MUTE : if this option is enabled, the volume/MUTE of the player will be overwritten
when loading the preset (in %).
7. Play mode : if this option is enabled, the play mode (sequential/random) will be overwritten.
8. Repeat mode : if this option is enabled, the repeat mode (play all, play one, repeat all or repeat
one) will be overwritten.
9. Fade mode : if this option is enabled, the transition mode between tracks within a playlist
(off/fade/cross-fade) will be overwritten.
10. Stereo/Mono : if this option is enabled, the mono or stereo output selection will be overwritten.