34
o
Kbps: bit rate/s
o
KHz: sampling frequency
o
DUR: duration
o
INDEX/TOTAL: index or position within all the files
o
SRC: source (USB, MMC, NET, etc.)
3.
Album art
: displays the album art for the file. For the album art to be correctly displayed, the
device needs to have an Internet connection. If the album art cannot be displayed, it will show a
default image.
4.
Playback time
: time elapsed since the start of playback of the URL or audio file.
5.
Signal presence
: this will be green if the device has an audio signal at its output. If the device is
not playing any audio, or if the volume level is too low, or the device is muted, it will be grey. This
virtual LED will be the same colour as the SP LED on the front of the device. It is useful for dealing
with issues when there is no audio signal.
6.
Playback controls
: allow the device's playback controls to be operated remotely: PREV, NEXT,
STOP, PLAY/PAUSE.
Please Note
: PLAYER ZERO has no playback controls on the front panel.
7.
Sources
: allows one of the available sources to be selected. The RELOAD button allows the
current source to be reloaded.
8.
Presets
: allows one of the available presets to be selected. The RELOAD button allows the
current preset to be reloaded. If changes are made to the current preset, a reload is required in
order for the changes to be applied.
9.
Stereo-mono
: selection of stereo output (left and right channels) or mono output (same signal on
left and right channel).
10.
Volume
: allows the volume to be controlled remotely.
Please Note
: PLAYER ZERO does not
have a volume control on the front panel.
11.
Repeat mode
:
o
PLAY ALL: Plays through the entire playlist once.
o
PLAY ONE: Only plays the first item in the playlist.
o
REPEAT ALL: Repeats the entire playlist on a loop.
o
REPEAT ONE: Only repeats the first item in the playlist.
12.
Play mode
:
o
SEQUENTIAL: Plays through the entire playlist in alphanumeric order.
o
RANDOM: plays through the entire playlist in pseudo-random order.
13.
Transition mode
, for transitions between audio files:
o
XFADE: The file that is playing fades out at the end of playback, as the next file increases
in volume. There is a smooth transition between files (approx. 5 sec.). There is some
overlap between tracks.
o
FADE: The file that is playing fades out at the end of playback (approx. 2.5 sec.). There is
a smooth transition between files. There is no overlap between tracks.
Summary of Contents for PLAYER ONE
