Ecler PLAYER ONE, User Manual

Page: 23 / 155

23
7.5 Configuration Menu
The configuration menu allows you to set network parameters, date and time, the audio output mode
(mono/stereo) and view relevant device information.
The configuration menu is accessed by holding down the ENTER key for a few seconds. Menu navigation
and parameter setting are the same as in the main menu (see chapter
Main menu ).
The configuration menu consists of the following items:
• CHANNELS : to set the output to stereo or mono.
• WIFI: to configure the Wi-Fi interface.
o
OFF: disables the Wi-Fi interface.
o
ON: enables the Wi-Fi interface. Press the CONTROL & SELECT encoder to display the IP
address assigned to the device. In MASTER mode this IP will be 192.168.189.1 (
refer to
the PLAYER ONE & PLAYER ZERO web GUI application manual for details).
o
RESTORE DEFAULTS: resets the default Wi-Fi configuration parameters.
• ETHERNET: to set the Ethernet interface to DHCP or static (dynamic or static addressing). Turn the
CONTROL & SELECT encoder to select one of the two options:
o
DHCP: press the CONTROL & SELECT encoder to display the IP address assigned to the
device (DHCP).
o
STATIC: if you have selected static addressing, you can edit the network parameters from
the front panel by pressing the CONTROL & SELECT encoder to access the IP submenu.
If you want to change the IP address, turn the encoder. To select the next parameter (byte),
press the NEXT key.
Each time you press the encoder, you can navigate through the different network
parameters: IP, MASK, GATEWAY, DNS1, DNS2 and APPLY+REBOOT. The latter option
is available only if you have made changes to any of the network parameters.
To confirm changes to network parameters, select YES in the APPLY+REBOOT submenu.
The device will restart with the new network settings.
•
DATE : displays date in YEAR/MONTH/DAY format
• TIME : displays time in HH:MM format
• GALLERY : under construction.
• VERSION: displays the current firmware version of the device.