15
•
Update Firmware:
you can install the latest firmware published on the Ecler website or a firmware
file hosted on one of the local storage systems (USB/MICRO SD) by turning on the device while
holding down the PLAY button. Follow the instructions on the PLAYER ONE LCD screen.
Notes:
•
To restore the latest released firmware, it is necessary to connect the device to a DHCP
server with Internet access,
to download the firmware.
•
If this action is not performed correctly, you may lose all device settings and parameters. Be
sure to save a backup copy of the device settings before executing this action.
They can also be done via the FD/FS button on the rear panel of the PLAYER ONE:
•
Factory Default:
Press and hold the FD/FS button on the rear panel for 10 seconds with a small
pin or paper clip while the unit is powered on.
•
Fail Safe (Restore firmware):
while the unit is unplugged, press and hold the FD/FS button with a
small pin or paper clip and then plug in the unit. The front LEDs will start flashing rapidly for 3
seconds (at this point the FD/FS button can be released).
Summary of Contents for PLAYER ONE
