16
Chapter 3 • Using the Web UI
H65874 Revision C
Status
Meaning
Comment
Attach Failed
Connection to satellite network failed.
Attached
Connected to satellite network (not yet ready).
Concurrent
Concurrent Dual WAN feature activated.
Using the primary and backup at the same time.
Searching...
Searching for satellite/searching for cellular signal.
Traffic Blocked
WAN failed ping test.
Displayed after a
WAN fails a ping test
Restarting…
WAN is restarting.
Ready
WAN is connected and ready but not active.
Active
WAN is connected and ready and active for passing
traffic.
Disabled
WAN is disabled(WAN interfaces configuration).
Upgrading
Upgrading terminal software (service mode).
Rebooting
Terminal is rebooting.
Resetting
Terminal is resetting to defaults.
For basic satellite connectivity, the terminal functions with one signal bar. For more details, the user
can reference the
Diagnostics
page to see if the Signal Quality (SQI) is at least 5 dB. It is desirable to
have 10 dB or better.
Note:
This does not apply to cellular connectivity.
Figure 3: Terminal Status page
On the
Terminal Status
page, you will find the following sections:
