32
Chapter 3 • Using the Web UI
H65874 Revision C
3.4.7
Concurrent Routing
This page allows the user to enable the
Concurrent Routing
feature and configure the rules for
outgoing traffic. The rules can be based on address and port numbers of source or destination based
on the protocol.
Note:
If you have configured the advanced routing configuration rules, you cannot make any
changes on the
Concurrent Routing
page. Click the
Advanced Configuration
button at the
bottom of the page to go to the
Advanced Routing Configuration
page to disable the feature.
Concurrent Routing:
This section allows the user to route specified traffic
over the backup WAN Interface by enabling this feature. To enable or disable the feature
check the box and click the
Apply Changes
button.
Advanced WAN Routing Rules
: In this section, the user can configure the rule details and
name the rule in the table.
Figure 19: Concurrent Routing page
You can configure up to five rules and configure these parameters:
–
Rule Name
–
Rule Precedence
–
Rule Enabled
–
Destination Address
