Chapter 3 • Using the Web UI
H65874 Revision C
33
–
Source Address
–
Type of Service
–
Rule Protocol
At least one of the following optional parameters must be provided:
–
Rule Name
–
Rule Precedence
–
Rule Enabled
–
Destination Address
Advanced Routing Configuration:
In this section, the user can configure advanced routing
rules by typing or by loading a file. Click the
Advanced Configuration
button to access the
page dedicated to the configuration.
Note:
For the
Advanced Rules
settings, a
Concurrent Dual WAN Configuration User Manual
document will be provided on request to ensure successful configuration at the
customer site.
For more information, please visit our website:
https://www.hughes.com/products-and-technologies/satellite-ground-
systems/mobile-satellite-terminals/echostar-mobile-satellite-terminals
3.4.8
Remote Management
This page allows the user to manage the
Remote Management
feature by applying the changes in
the sections below:
Remote Management:
This function allows the terminal to be managed remotely over the
satellite and the cellular connection. Click the
Change Settings
button to enable the
function. There are no default remote management settings. When configuring the terminal
for the first time, the user will need to enter a remote password.
After initial configuration, disabling Remote Management or changing the password will
require the user to enter the current remote password.
Remote Management Access Setup:
This section allows the user to configure the Remote
Management setup. Click the Apply Changes button to save the settings changes.
–
Primary Access Interface:
Remote access is not supported simultaneously through both
WAN Interfaces. Therefore the user has to select a primary access interface from the
dropdown menu.
Figure 20: Change Remote Management settings details
