W
IRE
I
NSTALLATION
S
TATION
L
OOP
W
IRE
15
7 Wire Installation
IMPORTANT:
Only use peripheral wire which is
supplied by ECHO Inc.
Avoid holes, ruts, obstacles, and standing water when
installing peripheral wire.
Install islands or pseudo islands to avoid obstacles
To avoid standing water and damp areas:
•
install drains
•
restrict access to the area
•
install islands or pseudo-islands
7.1 Station Loop Wire
The station loop wire starts and ends at a charging
station.
Install the station loop wire completely inside of the
field (Figure A), or partially inside of the field (Figure
B).The wire must extend a minimum of 11.5 ft. (3.5 m)
into the field.
The distance between the center of the charging
station and the end of the station loop wire must be a
minimum of 8.5 ft. (2.5 m).
1 – Station loop wire
2 – Charging station
ϴ͘ϱŌ͘
(2.5 m)
ϭϭ͘ϱŌ͘
(3.5 m)
ϴ͘ϱŌ͘
(2.5 m)
ϭϭ͘ϱŌ͘
(3.5 m)
ϴ͘ϱŌ͘
(2.5 m)
ϴ͘ϱŌ͘
(2.5 m)
A
B
2
1
2
1
