Echelon i.LON SmartServer 2.0 Repeating Manual Download Page 124

Page: 124 / 144

110

Connecting Devices on a Power Line Repeating Network

Connecting Devices Overview

You can connect the devices on a power line repeating network though the SmartServer gateway using
type translators, Web connections, and freely programmable modules (FPMs). These types of
connections provide an alternative to L

ORKS

connections, which are not supported on a power

line repeating network (devices on a power line repeating network cannot initiate network messages
and communicate in a peer-to-peer manner). The polling mechanism of the SmartServer’s internal
data server enables the data points on a power line repeating network to be updated.

You can use type translators to connect the devices on a power line repeating network to other devices
on the same network. With a type translator, you can specify the conditions (the rule) in which the
values of one data point are translated to another data point. For example, you could select the

SNVT_switch

data point of a switch device as the input point and the

SNVT_switch

data points of

multiple luminaires as the output points. You could then create a rule that specifies that the state and
values of the luminaires are to equal that of the switch. As a result, when the

SNVT_switch

data point

of the switch device changes or the SmartServer polls it, the SmartServer will transmit the updated
switch value to the luminaries, which will be turned on and illuminated, or turned off based on the
current state and value of the switch.

You can use Web connections to connect the devices on a power line repeating network to other
devices on the same network and to devices on other networks. With a Web connection, you select a

source data point

on a local SmartServer, and then select a compatible

target data point

on the local

SmartServer or on a remote SmartServer, which are collectively referred to as

Webbinder Destinations

After you create the Web connection, changes made to the value of the source data point on the local
SmartServer are transmitted to the target data points on the local or remote SmartServer, and the target
data points are updated accordingly. For example, you could select the

SNVT_switch

data point of a

switch device on a local SmartServer network as the source data point. You could then connect this
source data point to the

SNVT_switch

data points of multiple luminaires on the power line repeating

network, which function as the target data points.

You can use FPMs to connect the devices on a power line repeating network to other devices on the
same network. An FPM is a custom C/C++ application that you can write and deploy on your
SmartServer. With an FPM, you can specify that when a data point declared in the FPM application is
updated, the SmartServer is to perform some user-defined algorithm. This algorithm can perform a
number of functions, including writing updated values to one or more data points on the devices
attached to the power line repeating network. To write FPMs and deploy them on your SmartServer,
you need the full version of the

.LON FPM Development tool, which is included on the

.LON

Programming Tools DVD. For information on ordering the

.LON Programming Tools DVD, contact

your Echelon Sales Representative. For more information on using FPMs, see the

i.LON SmartServer

2.0 Programming Tools User’s Guide

Using Type Translators to Connect Devices within a Network

You can use a type translator to connect devices on a power line network to other devices on the same
network. To connect devices on the same power line repeating network with a type translator, follow
these steps:

Create a type translator.

Select input points and output points.

Select or create a type translation.

Creating a Type Translator

To open a Type Translator application, you must first create a

Type Translator

functional block.

After you create the

Type Translator

functional block, the functional block appears on the

SmartServer tree below the

i.LON App (Internal)