EBS Ink-Jet Systems EBS-6200, User Manual, Page: 62 / 124

EBS-6200
Printer User's Manual
Chapter 4 - Operating the Printer
60
200
The current setting of an object counter is displayed. Each time the photo detector is activated during
printing, the object counter setting is increased by 1 and this can be viewed on the display. Press any
nters
. In the main MENU select the
e SET SHIFT COUNTER or SET GLOBAL COUNTER item.
key to get back to the main menu.
Modifying Object Cou
In order to modify an ob
PRINTING item and then th
ject counter follow the procedure below
or
e the photo detector is activated during
an be viewed on the display.
T object co ach tim
p r setting i y 1 and this c
Enter a new setting and confirm it ey, except merical keys, if you wish to leave the
to
he current setting of the unter is displayed. E
rinting, the object counte s increased b
or press any k nu
counter unchanged.
In particular, if you enter 0 (zero), the counter is cleared.
NOTE:
If the
TEXT SERVICE
submenu is protected with a user password, then the
prompt
91020#1.0
type in the password appears before the global counter setting is displayed or
before the global or change counter is made available to modifications
. For details
on using a user password see section
4.4.1.9 Using the Password
.
4.4
enc
measured - see also se
llowing way. In the main MENU select the PRINTING item and
!
.3.8. Monitoring Print Rate
The print rate is regulated by an internal generator or shaft-encoder. The internal generator (or shaft-
oder) determines the timing of printing of vertical rows. The timing rate or print rate can be
ction
4.6 Adjusting Print Rate
.
The print rate is measured in the fo
then the
ROWS SPEED item.