background image

 

EBS-6200

 Printer User's Manual 

Chapter 4 - Operating the Printer

 

 

 

  24

 

 

200

 

Fig. 4 1.

 

View of the primary (main) MENU b

The first character (a digit or letter) in each MENU o

.2.

ranch, also called 

MAIN MENU

 

ption is a 

hot key

. When this key is pressed, the 

cursor b

n the selected option. 

The following k

£

 

To move the cursor one menu item upwards. 

¤

 

To move the curs

Y

 

¢

 or 

Y

 

£

 - 

to move the cursor to the first item. 

¤

 - 

to move the cursor to the last item. 

NOTE: 

After the selection of a command has been confirmed with the 

V

 key, it is not always 

possible to cancel the command. Some commands are executed immediately. 

ar is immediately positioned o

eys help you to move along the tree: 

or one menu item downwards. 

Y

 

¡

 or 

Y

 

V

 

To move one level downwards (to the next MENU branch) or to confirm the 
selected command for execution. 

U

 

To move one level upwards or cancel the selected command. If you press the 

U

 key several times, you are always moved back to the main MENU level. 

!

 

91020#1.0

 

Summary of Contents for EBS-6200





























































































































Reviews: