EBS Ink-Jet Systems EBS-6200, User Manual, Page: 80 / 124

EBS-6200
Printer User's Manual
Chapter 4 - Operating the Printer
78
200
Alarm LED
Message on the te
Description
rminal display
91020#1.0
LE
FILL.ERR./
D
PRESS.DROP
INK PRESSURE DROP
EBS-6000
EBS
A time-out error while setting the nominal pressure of ink in
den pressure drop below its nominal
re can be caused by the following:
The main ink filter is dirty - replace the filter - the
of pump control. Contact a service point.
the ink system or a sud
setting (
PRESS.DROP ).
The failu
•
operation can be performed by the user with no service
assistance.
A leakage in the ink system, damaged ink pump or elements
VACUUM PUMP TIME-OUT
EBS-6000
EBS
This is a time-out error, which occurs after the nominal
vacuum time limit in the system has been exceeded or after a
sudden deviation from the nominal setting – see paragraph
6.3.7 Reduced partial vacuum
.
replacement can be done by a user without service staff
e –
zzle is partially or completely clogged - clear the
pump itself or
pump control elements may be damaged. Contact your
service point.
This error can be caused by the following failures:
•
The main air filter is dirty – it should be replaced. The
assistanc see section
Replacing Air Filter
.
•
The no
nozzle – see paragraph
Clogged nozzle - cleaning the
nozzle
.
•
The ink system may be leaky, the vacuum
LED
INK LACK
INK:
EMPTY BOTTLE
No ink can be sucked from the ink bottle.
Supply ink by replacing the empty bottle with a full one. If no
new bottle is validated within 20 minutes of the indication of
the error, printing stops and the following message is
displayed:
EBS-6000
REPLENISHMENT ERROR
Replace the empty ink bottle with a new full one.
No ink can be sucked by the system althoug h a new bottle of
as been validated. The message can be generated for
g reasons:
pipe,
REPLENISHMENT ERROR and
ink h
the followin
INK LACK
EBS-6000
•
the operator has not inserted any filter-tipped suction pipe
into the bottle and has not screwed the bottle in place,
•
leaky pipes or clogged ink filter at the tip of the suction
EBS
•
leakage or damage to other elements that are re sponsible
for refilling the system with ink from the bottle.