EBS Ink-Jet Systems EBS-6200, User Manual

Page: 40 / 124

EBS-6200
Printer User's Manual
Chapter 4 - Operating the Printer
38
20091020#1.0
4.4.1.8.
Certain print para ring printing (see section
4.4.3.5 Print Parameters
). When
you change the text to be printed (e.g. as the line of products to be labelled changes), the parameters
need to be adjusted accordingly. Therefore it would be advisable to have a tool that might enable you
to do the following:
´
Store print parameters for a given text file,
´
Link the parame
´
ar et tomatically just before printing, after the print command has
cted.
A m t t red
in the library) c b eter block and such a pair can be stored in the file library. To
o this, follow the procedure below:
In the main MENU select the TEXT SERVICE item and then the LINK PARAMETERS item.
T d
4 1
w h
Now red off with the parameter-block name and the relevant information
remains in the printer’s memory even if the power supply is switched off.
The user can secure access to the following commands that are called
protected commands
further
´
all commands in the TEXT SERVICE submenu,
´
al ds in
´
command the
•
SAVE CURR
•
,
•
AL CO ,
•
SET GLOBA E
The objective is to p against accidental or
deliberate ccess by
This secu feature rd and enabling the password. Any access
to the secured MEN
r
b
password function rned off. When the password is defined, the
password fun n is enabled automatically after the unit has been switched on.
Defining a User Password
In the main MENU se TEXT SERVICE CREATE/CHANGE PASS
Linking File Names with Parameter-Block Names
meters need to be set du
ters stored with the text file to be printed,
Set all p am
been sele
ers for the text file au
solution to ee
an
he above requirements is offe
e linked with a param
red by
EBS
printers. Every text file (that is sto
d
he isplay shows the text file library from which you should select a text file name (see also section
.4. .1 General Information on Text Files
). Then the parameter block library is displayed, from
hic you should select a parameter block name.
the text file name is pai
For how to detach the parameter block from the a selected text file see paragraph
4.4.1.7 Accessing
the File Library
.
4.4.1.9. Using the Password
on:
l comman
s in
the PARAMETERS SERVICE submenu,
PRINTING submenu, such as:
ENT PARAM. ,
SET SHIFT COUNTER
GLOB
UNTER
L COUNT R .
rotect text files, parameter blocks and the object counter
a
rity
unauthorised persons.
is implemented by defining a passwo
U commands is possible only after the password has been typed in. When the
een typed in, the commands previously unavailable become available until the
enabled again or the printer is tu
ight password has
is
ctio
lect the item and then the item.
The re ype i confirm, and
then pass t displayed explicitly.
Only asterisks ( ****** ) are shown on the display.
quest to t
type in the
n a user password is displayed. Enter from 1 up to 8 characters and
word again in order to certify. The characters input are no