27-11-2014 57 ebode IPV4NVR
Choose one day
Click the week day words, the corresponding column will be selected. For example, click
TUE, the all column of TUE turns to red, that means during Tuesday whole day, when
something moving in the detection area, the camera will alarm.
Choose the Certain Time Period
Press the left mouse and drag it on the time boxes, you can select the serial area.
Step7: Click Save button to take effect..
When the motion has been detected during the detection time in the detection area, the
NVR will alarm and adopt the corresponding alarm linkage. Note: You must set the
detection area and detection schedule, or else there is no alarm anywhere and anytime.
Record Plans
You can enable or disable schedule record for the every channel. Set the record
schedule, and then the NVR automatically starts/stops recording according to the
configured schedule. The recording files will be save to the HDD or mobile store device.
The Icon
indicate starts schedule recording at the right bottom of the screen for
certain channel.
Step1: Choose ”
(Parameter Configuration) > Service Configuration > Record Plans”.
The Record Plans page is displayed.
Click here
