27-11-2014 55 ebode IPV4NVR
Step1: Select channel from drop-down box list.
Step2: Check the Enable checkbox to enable motion detection function.
Step3: Select the Sensitivity and Detection Interval.
The higher the sensitivity, the NVR will be more easily alarmed. The Detection Interval
time between two motion detection.
Step4: Check the checkbox to select the linkage method. You may refer to follow table
for details of linkage methods.
Parameter
Description
Send E-Mail
When the Motion detection is triggered , you can choose whether
to send e-mail. Note: Make sure you have set Email.
FTP
When the Motion detection is triggered, you can choose whether
to upload detection picture to FTP server. Note: Make sure you
have set FTP.
Record
If you select this checkbox, when the Motion detection is
triggered, the NVR will record automatically and store the record
files to the HDD.
Record Time
When you check the Record, you need to configure motion
detection recording time.
Buzzer
When the Motion detection is triggered, you can choose whether
to enable buzzing sound of the NVR device.
IPC Sound
Alarm
If you select this checkbox, when the Motion detection is
triggered, the people around the camera will hear beep alarm
sound of the IPC.
