27-11-2014 43 ebode IPV4NVR
Section
Icon
Name
Description
1
Live Video
Click this button and back to the realtime preview
window.
Parameter
Configur-
ation
There are Local Settings, Settings, Service
Configuration, User Management, System
Management in the Parameter Configuration
interface.
Playback
Play back the recorded video files of a specific
channel in the live view mode.
Logout
Disconnect the link between the client page of the
current browser and the NVR server.
2
Channel
01/02/
03/04
In channels of the NVR, you can add IPC devices. At
present, up to four channels can be monitored, that
is, up to four IPC devices can be added.
Play
Play an IPC monitoring video in a channel of the
NVR. By default, the video is played.
Stop
Stop playing the monitoring video in the channel.
Take
Snapshot
Select channel, click this button, and take a
snapshot of the monitoring video page of a
corresponding channel to the local computer. Set the
storage path, refer to the "Web > Parameter
configuration > Settings > Storage Location".
Record
Click this button to manually record the content on
the monitoring page. The recorded content is stored
in the HDD of the NVR.
PTZ
The configuring of the PTZ parameters should be
done before you control the PTZ camera.
Use the directional button to wheel the camera to
the location where you want to set preset.
indicates the IP camera go to the default center.
3
Preset
You can configure the preset and cruise of the IP
Camera.
IR LED
You can configure the LED of the IP Camera.
There are two modes: Manual and Auto.
Color
You can configure the color of the IP Camera.
4
Play all
Play monitoring videos in all channels.
All off
Close monitoring videos in all channels.
