27-11-2014 36 ebode IPV4NVR
4
．
Click the OK button to save and exit the window.
Step6: Select the Sensitivity from the drop-down box list.
You can drag the time bar to select the detection interval and record time.
Step7: Click Save button to take effect.
When the motion has been detected during the detection time in the detection area, the
NVR will alarm and adopt the corresponding alarm linkage.
Note: You must set the detection area and detection schedule, or else there is no alarm
anywhere and anytime.
Other Alarm:
Choose ”Menu > Settings > Alarm Settings > Other Alarm” in the Menu interface. The
Other Alarm interface is displayed. You can configure the HDD(Hard Disk Drive)
information.
Click Save button to take effect.
Parameter
Description
Sensitivity
The higher the sensitivity, the NVR will be more easily alarmed.
Detection Interval
The Triggered Interval time between two motion detection. The unit
is second.
Record
Time
（
Second
）
When you check the Record, you need to configure motion
detection recording time. The unit is second.
Parameter
Description
Type
Select Type form drop-down box list. It contains HDD Loss,
HDD Saturation, HDD Error, Video Loss and Network Error.
Buzzer
Check the
Buzzer checkbox if you want to enable buzzing
sound of the NVR device.
