EBARA GS, Instruction And Maintenance Manual

Page: 19 / 534

EN
19
Instruction and Maintenance Manual
32-200 6306ZZ 28 33 x 49 x 8 3.53 x 234.54
32-250 6306ZZ 28 33 x 49 x 8 3.53 x 278.99
40-125 6306ZZ 28 33 x 49 x 8 3.53 x 183.74
40-160 6306ZZ 28 33 x 49 x 8 3.53 x 183.74
40-200 6306ZZ 28 33 x 49 x 8 3.53 x 234.54
150-250 6310ZZ 48 53 x 73 x 10 3.53 x 278.99
150-315 6310ZZ 48 53 x 73 x 10 3.53 x 355.19
150-400 6310ZZ 48 53 x 73 x 10 5.33 x 456.06
150-400 L 6312ZZ 55 60 x 85 x 12.5 5.33 x 456.06
150-500 6314ZZ 65 70 x 95 x 12.5 5.33 x 532.26
200-400 6314ZZ 65 70 x 95 x 12.5 5.33 x 456.06
200-500 6316ZZ 75 80 x 109 x 14.5 5.33 x 532.26
* Seal measurements DIN 24960 UN
8.5 TROUBLESHOOTING
Although the equipment usually functions according to the user's requirements, in some
cases its operation may not come up to expectations due to problems with the system
or the power supply. The following table may be useful in finding possible solutions in
the event of failures or malfunctions:
PUMP
Fault Causes Measures to be taken
The motor will not start. - The control panel is not
working correctly.
- Check all conditions.
- Motor failure. - Repair the motor.
- Faults in the power supply. - Check and repair.
- Rotate it by hand.
Reassemble.
- Friction on rotation shaft. - Repair in specialist
workshop.
- Pump clogged. - Remove foreign bodies.
There is no priming. - Foreign bodies in the
bottom valve.
- Remove foreign bodies.
- Malfunction in the bottom
valve.
- Replace the valve.
- Water leakage from the
suction pipe.
- Check the suction pipe.