EBARA ESA70W, Instruction Manual, Page: 48 / 82

(
35)
EBARA
Corporation
6.4 Dip Switch
Set the dip switches to select the operating modes as shown in Table 6.4/6.5 / 6.6.
Table 6.4 Dip Switch-A Settings
No. Mode Off On Factory
setting
1 Data Length 7bits 8bits ON
2 Monitor Cooling water and N2 Always Only during operation OFF
3 Buzzer Not used Use ON
4 Operation switched to Remote According to signal Automatically stop OFF
5
External start/stop signal
* Alternate (Level)
Momentary (Pulse)
* OFF
6 ----- ----- ----- -----
7 Dilution N
2
mode Standard mode Dilution N
2
-0 mode OFF
8 BP operation in Remote Automatic operation External signal input OFF
* Optional
Table 6.5 Dip Switch-B Settings
No. Mode Off On Factory
setting
1 ----- ----- ----- -----
2 ----- ----- ----- -----
3 ----- ----- ----- -----
4 ----- ----- ----- -----
5 ----- ----- ----- -----
6 Remote Interface (IF) Exclusive special IF No use / standard IF ON
7 ----- ----- ----- -----
8 LCD screen initialize Carry out initialize Do not initialize OFF
Table 6.6 Dip Switch-C Settings
No. Mode Off On Factory
setting
1 Pump N2 WARNING output Normal Open Normal Close OFF
2 ----- ----- ----- -----
3 Back press WARNING output * Normal Open Normal Close OFF
4 ----- ----- ----- -----
5 ----- ----- ----- -----
6 ----- ----- ----- -----
7 ----- ----- ----- -----
8 ----- ----- ----- -----
* Optional