Eaton SC300 Operation Handbook Download Page 24

Page: 24 / 166

SC300 Handbook

IPN 997-00012-03 B2 Issue B2 July 2018

The following configuration information is automatically stored by the SC300:

Parameter

Description

Where to find:

Master

Configuration

The name of the configuration file

that was last loaded into the SC300 by

web interface or DCTools. A version

number (such as “87668” is attached)

to assist tracking of changes.

Web: Identity
DCTools:

Configuration > Identity

Configuration

Version

A unique number that is changed

whenever this configuration is

updated.

Configuration

Modified

This is ticked when any settings have

been changed from the last loaded

configuration file.

If the current configuration is corrupted for any reason, the SC300 will revert to this configuration.

Summary of Contents for SC300







































































































































































Search results

Summary of Contents for SC300

Reviews:

Related manuals for SC300

Brands by name

Popular brands

Eaton SC300, Operation Handbook

Search results

Summary of Contents for SC300

Reviews:

Related manuals for SC300

Brands by name

Popular brands