SC300 Handbook
22
Copyright © 2007-2018 Eaton Corporation. All Rights Reserved.
IPN 997-00012-03 B2 Issue B2 July 2018
Language Options
The SC300 system controller language default is English. Text on the LCD and web pages (see
details on page 106) can be shown in other languages by loading the appropriate Translation File
(SC300-xx-Vyyy.icp) into the SC300.
Contact Eaton for available Translation Files (see Worldwide Support on page 153).
► To add a new SC300 display/web page language:
1
Obtain the appropriate Translation File (SC300-xx-Vyyy.icp) from Eaton.
2
Save the file.
3
Connect to the SC300 via an Ethernet connection. See Communications Options on page 104.
4
Open a web browser and browse to the SC300 IP address.
5
Go to
Tools
>
Firmware Upgrade
.
6
Click on
Browse
and select the Translation File (SC300-xx-Vyyy.icp).
7
Click on
Next
then follow the prompts to add the language.
Language selection
An SC300 can hold multiple language files and any of these can be selected for the LCD and Web
pages. English is always available; other languages can be loaded as needed.
► To see which languages are loaded into an SC300
Either:
•
On the SC300 keypad go to:
Settings
>
Language
>
Edit
.
Or:
•
Connect to the SC300 via an Ethernet connection. See Communications Options
on page 104.
•
On the
Log On
web page, there is a flag icon for each language option available.
•
If no flag appears, only English is loaded.
► To select a new language for the Web pages
•
On the
Log On
web page, click on the flag icon for the language you require.
•
The web pages will change to this language.
► To select a new language for the SC300 display
Either:
•
On the SC300 keypad go to:
Settings
>
Language
>
Edit
.
•
Select the required language and press
Save
.
Or:
•
In Web go to
Communications
>
Front Panel
.
•
In DCTools, go to
Configuration > Communications > Front Panel.
•
Type the two letter language code in the
Language Code
field.
This code is the "xx" in the file name of the Translation File (SC300-xx-Vyyy.icp). For example:
zh = Chinese. Clear the Language Code field (blank entry) to revert to English.
•
Click
Apply Changes
. The display language will change.
The message "Waiting for database to become available for update ..." may display for a few
seconds.
If an incorrect or unavailable language code is used the display language will remain/revert to
English.
