SC300 Handbook
118
Copyright © 2007-2018 Eaton Corporation. All Rights Reserved.
IPN 997-00012-03 B2 Issue B2 July 2018
► To change access to the web server
Set the following parameters as required.
Parameter
Description
Where to find:
HTTP Access
Enable to allow un-encrypted access to the SC300
web server.
Disable to prevent un-encrypted access to the
SC300 web server.
SC300: Settings > Setup
DCTools: Configuration >
Communications > Remote
Access Protocols > HTTP
(Web)
Web: System > Interfaces >
Remote Access Protocols >
HTTP (Web)
HTTPS Access
Enable to allow encrypted access to the SC300
web server.
HTTPS access will be slower than HTTP
because of the encryption process.
Disable to prevent encrypted access to the SC300
web server.
User Setup
► To setup specific users and control their access levels
For each user, set the following parameters as required.
If there are no active users then web access is disabled.
Parameter
Description
Where to find:
User Name
This is not used in the login process (except for
"Default User"). It is displayed at the top-right of
the Web view screen.
Web: System > Interfaces >
Remote Access Protocols >
HTTP (Web)
DCTools: Configuration >
Communications > Remote
Access Protocols > HTTP
(Web)
Logon ID*
The logon name of the user.
Password*
The password of the user.
Lost passwords cannot be recovered. If a
password is lost then set a new password.
Read
Allows the user to view configuration settings
only.
Write
Allows the user to change configuration settings.
Backup
Allows the user to download configuration or
snapshot files.
Restore
Allows the user to upload configuration or
snapshot files.
Execute
Commands
Allows the user to stop and start control
processes.
Upgrade Firmware Allows the user to upgrade firmware.
Edit User List
Allows the user to edit the user list and change
user access settings.
*Leave both fields blank to allow Default User (anonymous) log on.
