Eaton S611, User Manual

Page: 41 / 96

S611 Soft Starter
MN03902011E—May 2012 www.eaton.com
29
Troubleshooting
General
In this section of the manual, we present a procedure you
can follow to diagnose a problem with your S611.
While many potential situations are outlined in this section, it
is possible you may run into a problem that is not covered
here. If you have worked through the following
troubleshooting procedure and find that you require further
assistance, please contact Eaton.
Please have the following information ready when you call:
Before You Begin to Troubleshoot
WARNING
Make sure you read and understand the procedures in
this manual before you attempt to set up or operate the
equipment.
WARNING
Do not work on energized equipment unless absolutely
required. If the troubleshooting procedure requires
equipment to be energized, all work must be performed
by properly qualified personnel, following appropriate
safety practices and precautionary measures.
We highly recommend that you read this entire section of
the manual before you begin to troubleshoot the S611 soft
starter.
You may want to obtain the following equipment to aid you in
troubleshooting:
●
Multimeter
●
Clamp-on ammeter
Always assume the S611 has high voltage applied and take
proper precautions while troubleshooting the soft starter and
associated equipment. Read all precautions at the front of
this manual before starting the troubleshooting process.
Define the Problem
1. The S611 soft starter fails to respond in any way to a
start command. Look at the front panel of the S611 soft
starter and determine the state of the LEDs on the User
Interface Module (UI). The following troubleshooting
flowcharts provide a logical sequence to determine
issues and suggest probable solutions to each problem.
Order Number:
Catalog Number:
Style Number:
Serial Number:
www.comoso.com