6
PROFILE INSTALLATION MANUAL
Eaton.com/profile
Important Safety Instructions (continued)
DANGER Read all instructions before assembling and using this furnishing - Save these instructions
DANGER
Electrical Ratings
Lift motor controller:
90 – 240V AC, 48Hz – 63Hz (universal)
Console Capacities
Dynamic load capacity of height adjustable lift motors:
157 lb� ea�
Primary stationary work surface capacity:
1�5 lbs� per inch of perimeter
Motorized sit-to-stand rear work surface capacity:
the lesser of 1�57 lbs per inch of perimeter (or) 157 pounds per lift motor
Motorized sit-to-stand front work surface capacity:
100 lbs�
Monitor pole capacity:
60 lbs� each
WARNING
Do not apply loads that exceed the capacity of the console� The applied load includes any items installed or placed onto the console work
surface or into the base cabinet compartments after receipt of the console from the carrier� Applied loads include (but are not limited to) monitor
poles, electronic equipment, power distribution units, cabling, Personal Environment System, and personal items�
Console Environment
CAUTION
TO ENSURE ADEQUATE AIR FLOW TO COOL STORED ELECTRONIC DEVICES, DO NOT LOCATE THE BACK OF THE CONSOLE
CLOSER THAN 3" TO ANY WALL, OR SIMILAR OBSTRUCTION� DO NOT PLACE ANY OBSTRUCTION NEAR ANY COOLING
PERFORATIONS�