38
Profile
Installation Manual
PROFILE INSTALLATION MANUAL
Eaton.com/profile
P a g e
|
36
Eaton’s Profile Command Console
Installation Manual
J. Installing A CPU Caddy
A CPU caddy usually replaces a 22” wide standard skin on the user side of a core, below the work surface. Refer to the Section V
Skin
Configuration Guide
of this manual to determine how to configure standard skins adjacent to the caddy.
To install A CPU Caddy
Attach the side plate to the base core with (4) ¼-20 x ½” hex head self-tapping screws. Position the plate so that the bottom of the
plate is 2” from the floor. (A final minor height adjustment may be required to ensure proper vertical alignment to the pivoting
caddy.) Attach the pivoting caddy assembly to the base core with (4) ¼-20 x ½” hex head self-tapping screws, ensuring that the
caddy’s wheels contact the floor. Rotate the caddy to ensure proper function. Also check the function of the caddy’s lock to ensure
proper engagement with the side plate.
¼-20 x ½” hex head self-tapping screws (8)
Figure 51
Side plate
2”