46
Profile
Installation Manual
PROFILE INSTALLATION MANUAL
Eaton.com/profile
P a g e
|
44
Eaton’s Profile Command Console
Installation Manual
Step 5b. Install An F Style Center Lift Leg
F Style center lift legs are used for 3-core corner sit-to stand desks. 2-Core corner sit-to-stand desks use E style center lift legs.
a.
Refer to column 7 in table 53 to determine the center lift leg style required for your corner sit-to-stand desk. The
instructions in this step are for F style center lift legs. If your desk requires an E style center lift leg, refer to step 5a. If your
desk does not require a center lift leg at all, proceed to step 6.
b.
Attach the F style center lift leg assembly to the center of the middle core wall with (4) ¼-20 x ½” hex head self-tapping
screws. See figure 66.
c.
Install (2) #10 x 3/8” Phillips head self-tapping screws into the top of the lift leg face plate. Leave the screws protruding
about 1/16”. Engage the “U” slots in the top of the upper leg skin onto the screws. The lower leg skin magnetically attaches
to the face plate. See figure 67.
d.
Adjust the lift leg’s leveler to ensure that it is in contact with the floor.
Figure 66
¼-20 x ½” hex head self-tapping screws (4)
Figure 67
#10 x 3/8” Phillips head
self-tapping screws (2)
Upper skin panel
Lower skin panel