Eaton PowerXL DX-NET-SWD, Manual

Page: 44 / 69

4 Commissioning
4.4 Acyclic data
40
DX-NET-SWD 06/13 MN04012009Z-EN www.eaton.com
620 1 rw U16 Drive stop mode P-05 0 - 2 0: Stop with ramp
1: free run-down
2: Stop with ramp 2
620 0 rw U16 Drive start function - Terminal
mode P-30 0 - 6 0: deactivated. (The variable
frequency drive will need a new
start edge): After being
switched on, as well as after a
reset, the variable frequency
drive will not start if digital
input 1 remains closed. The
input must be closed
after
switching on, or after the reset,
in order to start the variable
frequency drive again.
1: Auto_0 ; starts automatically
(the converter does not need a
start edge, signal is active
again)
2 : Auto_1 ; Will start automat-
ically once
3 : Auto_2 ; Will start automat-
ically twice
4 : Auto_3 ; Will start automat-
ically 3 times
5: Auto_4 ; Will start automati-
cally four times
6: Auto_5 ; Will start automati-
cally five times
620 3 rw U16 Drive start function - Scanning
mode P-31 0 - 3 REAF, start function with auto-
matic restart, operating unit.
This parameter will only be
active if the keypad control
operating mode is being used
(P-12 = 1 or 2).
0: Minimum speed; keypad
1: Previous speed; keypad
2: Minimum speed; terminal
3: Previous speed; terminal
626 1 rw U16 Optimum energy consumption P-06 0 - 1 0: deactivated
1: activated
626 0 rw U16 Parameter access lock P-38 0 - 1 0 : deactivated
1: activated
635 0 rw U16 Rotary start enable / DC injection
at enable P-33 0 - 1 0: deactivated
1: activated
682 0 rw UInt16 Motor overload protection P-51 0 - 1 0: thermal image is lost when
switching off
1: thermal image remains when
switching off
PN
U index
PN
U subindex
Access
right Data
type Meaning Display
number Value Range Description