
4 Commissioning
4.2 Programming
DX-NET-SWD
06/13 MN04012009Z-EN
www.eaton.com
25
4.2.2.1 Network – State diagram for profile 1
If the profile 1 with
PNU 928.0 = 1 - 5
is used then the general state diagram
shown below will apply.
Figure 13:
State diagram: Network (profile 1)
4.2.2.2 Network – S4: Operation, profile 1
If the profile 1 with
PNU 928.0 = 1 - 5
is used then the general state diagram
shown below will apply. The transitions will take place when the state of the
EN_Set bit is changed.
Figure 14:
State diagram: Network – S4 (profile 1)
S3: Switched On
Bit 2 = 1
S4: Operation
Bit 2 = 1
Bit 2 = 0
(EN_Op)
Bit 2 = 1
(EN_Op)
S4.1: Idle Operation
Bit 3 = 0; Bit 4 = 0
S4.2 Ramping Up Operation
Bit 3 = 1; Bit 4 = 0
S4.3: Ramping Down Operation
Bit 3 = 1; Bit 4 = 0
S4.4: TOR Operation
Bit 3 = 1; Bit 4 = 1
Bottom
of Ramp
Ramp Down
Bit 0 = 0 (EN_Set)
Ramp Up
Bit 0 = 1 (EN_Set)
Top of Ramp
Ramp Up
Bit 0 = 1 (EN_Set)
Summary of Contents for PowerXL DX-NET-SWD
