Eaton PDI WaveStar TFA Static Transfer Switch Installation and Operation Manual P-164001113—Rev 01
1
C
Chhaapptteerr 11 S
Saaffeettyy
Please pay special attention to the use of “Danger” symbols throughout this manual indicating electrical or
other safety hazards. Following these safety instructions is extremely important to avoid possible injury or
death.
This symbol is used throughout this manual to indicate the presence of high voltages, representing a hazard for
electric shock, burn or explosion. Follow the instructions carefully to avoid serious or fatal injury.
Follow safe electrical work practices:
•
Read, understand, and follow the instructions before installing this product.
•
Disconnect and lock-out all power supplying equipment before working on or installing a WaveStar Static
Transfer Switch. Use a properly rated voltage sensing device to confirm power is OFF.
•
Install equipment in an appropriate electrical environment per local regulations.
•
PCBs are ESD sensitive equipment: Ground yourself, discharge any static charge and ensure that the
device is effectively grounded before handling the unit.
Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel and in
accordance with all local safety codes. Power Distribution, Inc. assumes no responsibility for any
consequences arising out of the use of this manual.
This document should not be viewed as sufficient by
otherwise non-qualified personnel to operate, service, or maintain the equipment discussed.
Summary of Contents for PDI WaveStar TFA STS 250-600A
Page 4: ......
Page 150: ...P 16400111301 P 164001113 01 ...
