Eaton PDI WaveStar TFA STS 250-600A, Installation And Operation Manual

Page: 130 / 150

116 Eaton PDI WaveStar TFA Static Transfer Switch Installation and Operation Manual P-164001113—Rev 01
Table 7. Digital Screen Points (Continued)
Name Normal Abnormal Alarm
Alarm
Index
Status
Status
Index Normal
Value
Summary OK Alarm Yes 149 No 1149 0
NSW Timeout OK Alarm If Neutral Sw 150 No 1150 0
NSW Out 24V OK
Alarm
If Neutral Sw
151 No 1151 0
NSW Out 5V OK Alarm If Neutral Sw 152 No 1152 0
NSW S2 5V OK Alarm If Neutral Sw
153 No 1153 0
NSW S1 5V OK Alarm If Neutral Sw 154 No 1154 0
NSW S2 Fuse OK Alarm If Neutral Sw
155 No 1155 0
NSW S1 Fuse OK Alarm If Neutral Sw 156 No 1156 0
NSW Voting OK Alarm If Neutral Sw
157
No
1157 0
NSW Logic OK
Alarm
If Neutral Sw
158 No 1158 0
Branch OK Alarm If Has Branches 159 No 1159 0
Switch Inhibit OK Alarm If Installed 160 No 1160 0
1177..22 A Annaalloogg S Sccrreeeenn P Pooiinnttss
Table 8 lists the Analog Points as they show on the screen.
The same point name is used when the point appears on the Analog Values Screen, the Event Log Screen, or
the Alarms Screen.
The normal range measurement bracket for each point is given in the Low Alarm Index and High Alarm Index,
which are not indexed contiguously with the point, but in adjacent tables following the list of points.
Point values may be scaled as shown in the Value Scale column. For example, for “Output %KVA A” (point 34)
a 68% measurement is listed as 68, not 0.68.
Custom STSs can have different points and the standard points list may not apply.
Table 8. Analog Screen Points
Name Units
Value
Index
Value Scale
Low Alarm
Index High Alarm
Index
S 1 Volts AB Volts 1 None 161 532
S 1 Volts BC
Volts 2 None 162 533
S 1 Volts CA Volts 3 None 163 534
S 2 Volts AB Volts
4 None 164 535
S 2 Volts BC Volts 5 None 165 536
S 2 Volts CA Volts 6 None 166 537
Output Volts AB Volts 7 None 167 538
Output Volts BC Volts 8 None 168 539
Digital and Analog Points