SIDE CABLE CHASE VERTICAL CABLE MANAGER
1. Loosely install a ¼-20 carriage bolt, washers and wing knob into the two rectangular mounting holes in the cable
manager. See figure 10-9.
2. Engage the carriage bolt heads into the guide slots in the cable chase accessory brackets. Slide the cable man-
ager into position and then tighten the wing knobs. See figure 10-10.
3. Assemble the cable rings to the cable manager with #10 x 3/8” phillips pan head self tapping screws. See figure 10-11.
51
Figure 10-9
Vertical cable manager
1/4”-20 carriage bolt
Wing Knob
Washer
Figure 10-10
Figure 10-11
Vertical cable manager
Cable ring
#10 x 3/8” phillips
pan head screws
Cable chase accessory
bracket
Pub Num: MN159002EN rev 1.0
Paramount Enclosure
Installation Guide
Summary of Contents for Paramount Enclosure
Page 1: ...Eaton Data Center Racks...
Page 2: ...U...
