PANDUIT STYLE CABLE MANAGER
The Panduit CMBRC5 style cable manager can be assembled to any standard EIA hole pattern. Use three 10-32
phillips pan head machine screw for each manager. Rack mount rails with 3/8” square holes will require 10-32 cage
nuts. See figure
9-35
.
Rack mount rails that are installed into the Network style enclosure frames have a separate pattern of holes adjacent
to the standard EIA holes for mounting the Panduit cable manager. See figure
9-36
.
37
Figure
9-3
6
Network style enclosure
Figure
9-3
5
Cable manager
#10-32 phillips pan
head machine screws
#10-32 phillips pan
head machine screws
Cable manager
Rack mount rail
Cage nuts
Network style enclosure
Pub Num: MN159002EN rev1.0
Paramount Enclosure
Installation Guide
Summary of Contents for Paramount Enclosure
Page 1: ...Eaton Data Center Racks...
Page 2: ...U...