38
Control monitoring and display screen
EATON ICUBE 2.0
UM.ICUBE2.0.SG.0822 August 2022 www.eaton.com
5.12 Special operating instructions
5.12.1 Network configuration:
1. The user can click on the “Setting” tab on the left column and then select “Network “, as shown in the
figure: 5.17 & 5.18 below.
Figure 5 .17
Figure 5 .18
Click “IP config” to modify the system IP, enter the IP address and gateway , then click “ modify” and wait for
10 seconds to activate. Shut down and restart the monitoring server. As shown above.
