Eaton i-onEX Series, Administrator'S And User Manual

Page: 55 / 116

i-on40 & i-onEX Range 4. Administration
Page 49
9. Press any button on the device
that you wish to register. Hold the
button down until you see the
transmit LED flash.
The keypad gives a double “beep”
confirmation tone. The keypad
display shows:
The control unit has learned the
identity of the device and linked it
with your access code.
If the control unit has already
learned that device then you will
hear a low tone and the display
tells you that the device is already
in use.


followed by:


If you do not wish to register a device press

.
If you have a device and want to know who it belongs to then use the Test -
Remotes
menu option, see page 57 .
Radio Hold Up Alarms (HUA)
No user can change any o
ther user’s radio HUA. (A Master User or Admin
User can register a radio HUA for a new user when they first add the user
to the system, see page 52.) Any user except a Guard or Set Only user can
register a radio HUA for themselves.
Note: While you are registering a new radio HUA the control unit will not
respond to an alarm signal from any radio HUA it has already
learned.
1. Make sure the display shows the
standby screen.


2. Press .


3. Key in your access code (or
present a tag).


4. Press

.


If you are a Master or Admin User:
(otherwise go to step 6)