Eaton i-onEX Series Administrator'S And User Manual Download Page 5

Page: 5 / 116

i-on40 & i-onEX Range

Page v

Compliance Statement

The i-on50EX and i-on160EX:

Are suitable for use in systems designed to comply with
PD6662:2010 at Grade 2, Grade 3 and environmental class II.

Are suitable for use in systems designed to comply with the
requirements of EN50131-3 at Grade 2, Grade3 and environmental
class II.

Comply with the requirements of EN50131-6:2008 at Grade 2, Grade
3 and environmental class II.

The i-on30EX and i-on40:

Are suitable for use in systems designed to comply with
PD6662:2010 at Grade 2, and environmental class II.

Are suitable for use in systems designed to comply with the
requirements of EN50131-3 at Grade 2 and environmental class II.

Comply with the requirements of EN50131-6:2008 at Grade 2 and
environmental class II.

When fitted with the appropriate communicator these products are
compliant with EN 50136-1. They allow the alarm transmission system to
meet the performance requirements of EN 50131-1:2006 ATS 2 provided
that:

a) They are installed in accordance with the installation instructions.

b) The connected PSTN is functioning normally.

If the installer selects a non-compliant configuration then they must
remove or adjust compliance labelling

Third party approval carried out by ANPI.

Please Note:

This Guide applies to i-on control units with version 4.04 software.

Summary of Contents for i-onEX Series





















































































































Search results

Summary of Contents for i-onEX Series

Reviews:

Brands by name

Popular brands

Eaton i-onEX Series, Administrator'S And User Manual

Search results

Summary of Contents for i-onEX Series

Reviews:

Brands by name

Popular brands