Eaton i-onEX Series, Administrator'S And User Manual

Page: 29 / 116

i-on40 & i-onEX Range 3. Setting and Unsetting
Page 23
The bottom line of the display
shows each item from the rest of
the menu in turn.
b. Press

.
Go to: 3. Finishing Setting on
page 24.
Partitioned Systems
Do this: The display shows:
The bottom line of the display
shows the first item in the setting
options menu.
If any partition is already set then
the system will skip to point b.

↕


a. Press

or

to show “Partitions”.
“Partitions” is the second item
down on the setting options menu
(or third if a part set is available).

↕


b. Press  .
The bottom line of the display
shows the state of the first
partition:
U = Unset
S = Full Set
P = Part Set

↕


c. Press

or

to select the
change that you want.
“U>P” = change to Part Set.
“U>S” = change to Full Set.
“S>U” = change to Unset
“P>U” = change to Unset

↕


d. Press

or

to show any other

↕

