Eaton i-onEX Series, Administrator'S And User Manual

Page: 67 / 116

i-on40 & i-onEX Range 4. Administration
Page 61
Keypad
1. Make sure the display shows the
standby screen.


2. Press .


3. Key in your access code (or
present a tag).


4. Press

until you see:


5. Press

.
The display shows:


6. Press

until you see:


7. Press

.
This display tells you to press any
key on the keypad to test it. The
bottom line of the display shows
the number of the keypad, followed
by its name.
Note that the LEDs around the
navigation key and the four LEDs
at the right should all be glowing
red.


8. Press each key once.
The bottom line of the display
shows the key you pressed.
Press both radio HUA keys
together to test.


As you press the function keys on
the keypad the display shows their
name, for example:


9. Press

to end the test.

