Eaton i-onEX Series, Administrator'S And User Manual

Page: 94 / 116

4. Administration i-on40 & i-onEX Range
Page 88
24. Press

.
The keypad gives a double “beep”
confirmation tone. The keypad
display shows:


Note: If you do not wish the output to switch on and off at a set time
then leave the “On Time” and “Off Time” options set to
“00:00”.
To Program Days Of The Week for Latched Outputs
In addition to specifying an On and Off time during the day for a latched
output, you can also specify which day of the week that the output should
operate on.
First make sure that the output you wish to use is programmed as Latched
= Yes (see steps 1 to 16 starting on page 84). Then make sure that you
have specfied On and Off times (see steps 17 to 24 starting on page 87).
25. Press

until the display shows:


26. Press

.
The bottom line of the display
shows “Sunday” and “Yes” if the
output will operate on that day, or
“No” if the output will NOT operate
on that day.


27. Press

or

to change the “Yes”
to a “No” or the “No” to a “Yes”. For
example:


28. Press

repeatedly to show the
other days of the week, for
example:


29. Press

or

to change the the
“No” to a “Yes” for each day on
which you want the output to
operate.
Note: If you wish the output to switch on and off at the
same time every day then make sure each day
of the week is
set to “Yes”.