EC500 Controller Handbook
Copyright © 2019 Eaton Corporation. All Rights Reserved.
Issue A March 2019
Page 33 of 107
Information
The following information is available about all Solar Chargers:
Common Information
Parameter
Description
Where to find:
Active S-Charger
Count
Active Solar chargers count
Display:
Menu>System Status>S-Charger
Web:
Menu>System Status>S-Charger
Total S-Charger
Current
Total current provided by Active Solar
chargers.
Total Solar kWh
Total power provided by Active Solar
chargers.
ID
ID number of Solar charger provided by
EC500
Individual Charger Information
Parameter
Description
Where to find:
Output Voltage
Output voltage generated by Solar
charger.
Display:
Menu>System Status>S-Charger
Web:
Menu>System Status>S-Charger
Output Current
Output current generated by Solar
charger.
Status
Communication status between Solar
charger and EC500.
DC State
The status of DC state of solar charger;
Solar charger is ready to provide output
power. When all working conditions are
normal then DC State of Solar charger
shows ON status.
Input Voltage
Input voltage to Solar charger provided by
Solar panel.
Input Current
Input current to Solar charger provided by
Solar panel.
Input Power
Input power to Solar charger provided by
the Solar panel.
Solar kWh
Output power provided by Solar charger
to load.
Solar Runtime
Run Hour increments when input current
in single solar charger is greater than
0.1A. In every 6 minutes Run Hour
counter should increment by 0.1.
Temp. Rise
The
Solar charger’s Mosfet temperature.
