![background image](http://html1.mh-extra.com/html/eaton/easy500-easy700/easy500-easy700_operating-instructions-manual_3938169034.webp)
2 Installation
2.4 Connecting the power supply
30
Operating instructions
05/10 MN05013003Z-EN
www.eaton.com
2.4.3 Supplying AC expansion units
EASY…-AC-.E
Figure 8:
Power supply on the AC expansion units
WARNING
Ensure the proper connection of the L phase conductor and N
neutral conductor if you are using easy-AS devices with a power
supply greater than 24 V AC!
If the L phase conductor and N neutral conductor
connections
are reversed,
the full connection voltage of the L phase
conductor (100 to 240 V AC) is present on the serial multi-
function interface.
Improper connection on the multi-function interface or the
insertion of conductive objects in the shaft may cause fatal
electric shock.
For your safety:
•
Use the original programming cable, which ensures safe
electrical isolation of the PC terminal from the connection
voltage of the L phase conductor (100 to 240 V AC).
Press the interface cover back onto the shaft if you no longer
need the interface.
CAUTION
A short current surge will be produced when switching on for
the first time. Do not switch on easy with reed contacts
because these could possibly burn or stick.
N
N
L
N
F1
L
E+
E-
R1
...
R12
Summary of Contents for easy500, easy700
Page 4: ...II...
Page 28: ...1 1 5 operating principles 24 Operating instructions 05 10 MN05013003Z EN www eaton com...
Page 210: ...7 What Happens If 7 3 Event 206 Operating instructions 05 10 MN05013003Z EN www eaton com...
Page 234: ...9 Glossary of terms 230 Operating instructions 05 10 MN05013003Z EN www eaton com...