Eaton easy500, easy700, Operating Instructions Manual, Page: 115 / 240

4 Wiring  with
4.7 Text Display
Operating instructions 05/10 MN05013003Z-EN www.eaton.com
111
• STOP operating mode is selected.
• easy's power supply is no longer present.
• The OK or DEL + ALT buttons are used to switch to a menu.
4.7.5 Text Entry
The text entry can only be carried out with easySoft-Basic or easySoft-Pro
from Version 6.xx).
4.7.6 Font
The ASCII letters can be displayed in upper and lower case.
• A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
• a b c d e f g h i j k l m n o p q r s t u v w x y z
• 0 1 2 3 4 5 6 7 8 9
You can edit Cyrillic upper case letters with easy500/700 devices from
version no. 10.
From easySoft version 6.x, the following special characters are permitted in
addition to the blank character and 12 different graphic characters:
° ! # $ % & ' ( ) * + , - . / : ; < = > ? [ \ ] ^ _ ` { | }
Figure 58: Text output examples
4.7.7 Entering a setpoint in a display
Two values from the following sources can be included in a text:
• actual value and setpoint of function relays,
• analog input values,
• Time and
• Date.
The position of the setpoints and actual values is defined in the middle of the
2nd and 3rd line starting from column 5. The length depends on the value to
be displayed. Setpoint entries in text displays are useful if the PARAMETERS
menu is not available for the display or entry. They are also used if the
operator is to receive a message as to which setpoint he is to change.
Counter with actual value Analog input scaled as
temperature value D1 as error message on
fuse failure
QUANTITY
PCE:0042
!COUNTING!
TEMPERATURE
OUT -010 DEG
IN +018 DEG
HEAT..
FUSE FAULT
HOUSE 1
FAILED!